950 Pulse Finger Plus Oximeter® Instruction Manual
 Company:  Respironics, Inc.

 Summary:  Respironics, Inc. has integrated the finger clip sensor and the electronics of the Respironics Model 920 hand held Pulse Oximeter into one unit, the Model 950. The 950 is very small (1.3 inch W x 1.3 inch H x 2.2 inch L) and lightweight (2 ounces).

The 950 displays numerical values for functional arterial hemoglobin oxygen saturation (Percentage SpO2) in percentage and pulse rate ( ) in beats per minute on light emitting diode (LED) digital displays.

With each detected pulse, the Perfusion O Display blinks. Patient perfusion signals are graded as good, marginal or inadequate and are indicated as such by the perfusion indicator changing color from green to yellow or red respectively. This sophisticated, yet simple technique provides a pulse-by-pulse visual indication of waveform signal quality, without requiring the user to perform complex signal analysis during critical patient care situations.

Two AAA battery cells power the 950 and operate it for approximately 1,600 spot checksa or 18 hours of continuous operation between battery replacement. When the batteries are low, the digital displays will blink once per second. (Refer to page 9 for battery specifications and page 10 for battery replacement instructions.)

 Resource Type:  Instruction Manual

 Resource:
 
 Related Products:
950 Finger Pulse Oximeter

 Related Categories:
Anesthesia
Patient Monitoring (Anesthesia)
Finger Pulse Oximeter