| |
|
|
|
|
|
All bar electrodes are nonferrous and consist of two tin electrodes in a watertight acrylic bar. The bar configuration permits easy electrode placement without disturbing electrode to electrode spacing. Bar electrodes are recommended for use when applying a stimulus, or recording a signal, during nerve conduction, somatosensory or muscle twitch recordings. When using bar electrodes for signal recording, a single ground lead (LEAD110 with EL503) is required.
|
Company:
Date:
October 27, 2008
|
|
|
|
|
|
|
|
|
|
All bar electrodes are nonferrous and consist of two tin electrodes in a watertight acrylic bar. The bar configuration permits easy electrode placement without disturbing electrode to electrode spacing. Bar electrodes are recommended for use when applying a stimulus, or recording a signal, during nerve conduction, somatosensory or muscle twitch recordings. When using bar electrodes for signal recording, a single ground lead (LEAD110 with EL503) is required. The leads [2.4mm (2 x 1.2mm) x 61cm long] terminate in standard Touchproof connectors, which connect to any 100C-series Biopotential ampli
|
Company:
Date:
October 27, 2008
|
|
|
|
|
|
|
|
|
|
Cadwell’s Bar electrodes have a large body for
increased stability and solid, machined contacts
(spaced 3 cm center-to-center) to resist the wear
and tear of repeated cleaning. Polarity indicators
are molded into the body. The convenient, snap-on
handle fits our bar electrode styles. Shielded bar
electrodes are also available.
|
Company:
Date:
October 27, 2008
|
|
|
|
|
|
|
|
|
|
Electrodes used for pick-up of surface EMG and E-P signals. Electrodes Have 48" leads and terminate in a standard 1.5 mm. Touchproof DIN Safety Plug. (All electrodes are non-returnable after the package seal is broken. Examine the electrodes closely for style & plug connection before breaking package seal.
|
Company:
Date:
October 27, 2008
|
|
|
|
|